+55 11 2839-3209

Femtoline Dual Band Mirrors

Laser mirrors for femtosecond applications are designed to have a broad operating wavelength range and linear phase versus frequency characteristics (low group delay dispersion (GDD)). The coating is a single layer dielectric and has no phase shift over the operating wavelength region.


High reflectivity mirrors always have higher reflection, broader operating region and lower pulse distortion for s-polarization than for p-polarization for the same dielectric coating. If possible use the mirrors with s-polarized beam.


Our standard mirrors are suitable for fundamental Ti:Sapphire and Yb:KGW/KYW lasers and their doubled, tripled or quadrupled frequencies. Recommended for high power laser applications operating in UV region.


Hard dielectric High Reflection R>99.5%
Angle of Incidence
Designed for Average Polarization
Laser Damage Threshold >50 mJ/cm2, 50 fsec, 800 nm typical


UV grade Fused Silica or BK7 glass
S1 Surface Flatness
λ/10 at 633 nm
S1 Surface Quality
20-10 scratch & dig (MIL-PRF-13830B)
S2 Surface Quality
Commercial polish
Diameter Tolerance
+0.00 mm-0.12 mm
Thickness Tolerance
<3 min
0.3 mm at 45° typical